Epoxy Resin Fiberglass Rod Covered with Silicone Rubber

Short Description:

Resin Fiber glass rod and Silicone Rubber. Widely used in the field of electrical insulation, internal manrod diameter and external silicone rubber thickness can be customized according to customer needs.


Product Detail

Product Tags

Epoxy Resin Fiberglass Rod Covered with Silicone Rubber,inner is Epoxy Resin Fiber glass rod and Silicone Rubber. Widely used in the field of electrical insulation, internal manrod diameter and external silicone rubber thickness can be customized according to customer needs. Epoxy fiberglass rod is an insulating product formed by impregnating an epoxy composite resin with an alkali-free fiberglass yarn through vacuum injection, continuous pultrusion and curing. Fiberglass insulating rod has good electrical properties and mechanical strength, as well as high temperature resistance and corrosion resistance. FRP ROD is made through alkali-free and twist-free glass fiber yarn soaking in epoxy compound glue, and passing the vacuum injection, continuous pulling and pressing, and being solidified. They have good electrical performance and mechanical strength. FRP rod are widely used in freeway; bridge; airport; tunnel; railway station; jetties; underground engineering; sewage treatment plant etc.

Technique:Pultrusion

Dimensions:φ16,φ20,φ26,φ36,φ40,φ46,φ80 ect

Length:It's depend on customer's request

Material:Epoxy resin and fiberglass, Silicone

Silicone Color:Grey or Red

The Silicone Coating:

- the thickness can provide as per the customer's request.

- the coat entire rod: end to end; or according to the customer's requirment.

Characteristic

1.No flaw,crack in the surface and interior, each bar color uniform(green or light yellow).

2.Can withstand the sawing, milling, planning, drilling, lathe and other mechanical processing.

3.Internal thread can be tapping with screw tap, external thread can be polished, but not allowed to bear overload.

4. It has good damping, creep resistance, fatigue resistance, fracture resistance, high temperature resistance, stress corrosion resistance etc.

Fiberglass Rod Specification

Specification

Item

Density

≥2.1 g/cm3

Water Absorption

<0.10 %

Tensile Strenth

≥1200 Mpa

Bending Strenth

≥900 Mpa

Compressive Strength (axial)

≥680 Mpa

Water Diffusion Test 1min

12 KV

Leakage current

<1 mA

Dye penetration

pass after 15mins


  • Previous:
  • Next:

  • Write your message here and send it to us