Wholesale Zinc Oxide Resistor - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun
Wholesale Zinc Oxide Resistor - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun Detail:
Epoxy Resin Fiberglass Rod Covered with Silicone Rubber,inner is Epoxy Resin Fiber glass rod and Silicone Rubber. Widely used in the field of electrical insulation, internal manrod diameter and external silicone rubber thickness can be customized according to customer needs. Epoxy fiberglass rod is an insulating product formed by impregnating an epoxy composite resin with an alkali-free fiberglass yarn through vacuum injection, continuous pultrusion and curing. Fiberglass insulating rod has good electrical properties and mechanical strength, as well as high temperature resistance and corrosion resistance. FRP ROD is made through alkali-free and twist-free glass fiber yarn soaking in epoxy compound glue, and passing the vacuum injection, continuous pulling and pressing, and being solidified. They have good electrical performance and mechanical strength. FRP rod are widely used in freeway; bridge; airport; tunnel; railway station; jetties; underground engineering; sewage treatment plant etc.
Technique:Pultrusion
Dimensions:φ16,φ20,φ26,φ36,φ40,φ46,φ80 ect
Length:It’s depend on customer’s request
Material:Epoxy resin and fiberglass, Silicone
Silicone Color:Grey or Red
The Silicone Coating:
- the thickness can provide as per the customer’s request.
- the coat entire rod: end to end; or according to the customer’s requirment.
Characteristic
1.No flaw,crack in the surface and interior, each bar color uniform(green or light yellow).
2.Can withstand the sawing, milling, planning, drilling, lathe and other mechanical processing.
3.Internal thread can be tapping with screw tap, external thread can be polished, but not allowed to bear overload.
4. It has good damping, creep resistance, fatigue resistance, fracture resistance, high temperature resistance, stress corrosion resistance etc.
Fiberglass Rod Specification
|
Specification |
Item |
|
Density |
≥2.1 g/cm3 |
|
Water Absorption |
<0.10 % |
|
Tensile Strenth |
≥1200 Mpa |
|
Bending Strenth |
≥900 Mpa |
|
Compressive Strength (axial) |
≥680 Mpa |
|
Water Diffusion Test 1min |
12 KV |
|
Leakage current |
<1 mA |
|
Dye penetration |
pass after 15mins |
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for Wholesale Zinc Oxide Resistor - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun , The product will supply to all over the world, such as: Kuala Lumpur, Malaysia, Czech republic, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By olivier musset from Jamaica - 2017.10.23 10:29
We have been looking for a professional and responsible supplier, and now we find it.
By Nicci Hackner from Swiss - 2018.06.21 17:11
