OEM/ODM Manufacturer Epoxy Tube - Epoxy fiberglass tube – Fayun
OEM/ODM Manufacturer Epoxy Tube - Epoxy fiberglass tube – Fayun Detail:
Epoxy fiberglass tube is made by good quality glass fiber steeped into epoxy resin of thermostability,which is high quality material as making high voltage electric devices,such as breakers,thimbles,mutual inductors,zinc oxide arresters,etc.
| Inner diameter(mm): | |||||
| Ø24 Ø30 Ø33 Ø36 Ø38 Ø42 Ø46 Ø48 Ø50 Ø52 Ø54 Ø55 | |||||
| Ø56 Ø58 Ø60 Ø63 Ø66 Ø74 Ø75 Ø76 Ø78 Ø Ø80 Ø82 Ø100 Ø105 | |||||
| Ø115 Ø130 Ø140 Ø144 Ø180 Ø1851 Ø94 Ø210 Ø240 Ø245 Ø250 Ø253 | |||||
Other Inside diameter is available.
Outer diameter and length can be made by customers’ specific requirements.
Features
*Non-Corrosive
*Dimensionally Stable
*Lower Life Cycle Cost
*Flame Retardant
*Easy to Fabricate and Install
*Electrically Non-Conductive
*Lightweight/High Strength
*Resists Insect Damage
*High Impact Strength
*Low Water Absorption
*Greater Flexural Strength Than Timber
*Non-Leeching
Physical,mechanical and dielectric property should follow the table below:
| Technical requirement | |||||
| Normal Diameter | Thickness | Length | Tolerance Allowed | ||
| inside diameter | outside diameter | Length | |||
| 30~70 | 3~20 | 500 | ±0.3 | ±0.3 | ±1 |
| 70~150 | 3~20 | 1000 | ±0.5 | ±0.5 | ±2 |
| 150~550 | 10~100 | 2800 | ±0.5 | ±0.2 | ±2 |
| Physical and mechanical parameters | Physical and mechanical parameters | ||||
| Index Name | Unit | Index | Index Name | Unit | Index |
| Density | g/cm3> | ≥1.80 | Density | g/cm3> | ≥1.80 |
| Water absorption | % | ≤0.15 | Water absorption | % | ≤0.15 |
| Intensity of curvature(circling direction) | Mpa | ≥400 | Intensity of curvature(circling direction) | Mpa | ≥400 |
| Intensity of compress | Mpa | ≥98 | Intensity of compress | Mpa | ≥98 |
| Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 | Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 |
| Voltage vitalityon vertical layer in the oil at 90°C for 5min | MV/m | ≥12 | Voltage vitalityon vertical layer in the oil at 90°Cfor 5min | MV/m | ≥12 |
Product detail pictures:
Related Product Guide:
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for OEM/ODM Manufacturer Epoxy Tube - Epoxy fiberglass tube – Fayun , The product will supply to all over the world, such as: Armenia, Suriname, Puerto Rico, Our next goal is to exceed the expectations of every client by offering outstanding customer service, increased flexibility and greater value. All in all, without our customers we do not exist; without happy and fully satisfied customers, we fail. We are looking for the wholesale, Drop ship. Please contact us if you are interesting our products. Hope to do business with you all. High quality and fast shipment!
By Alma from Netherlands - 2017.10.27 12:12
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Rachel from Kuala Lumpur - 2018.12.30 10:21
Write your message here and send it to us
