New Arrival China Cross Arm Insulator - Composite Suspension Insulators – Fayun

Short Description:

Product Detail

Product Tags

Feedback (2)

Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for Mov Varistor, Insulation Rod, Metal Oxide Block, With a rapid advancement and our buyers come from Europe, United States, Africa and everywhere in the world. Welcome to visit our manufacturing unit and welcome your order, for further more inquires be sure to don't hesitate to get hold of us!

New Arrival China Cross Arm Insulator - Composite Suspension Insulators – Fayun Detail:

Composite suspension insulators:the silicon rubber rain shed, designed according to the aerodynamics principle, use the whole-moulding method, to make sure the validity of total creepage distance under every climate and nasty conditions, as well as improved the pollution discharge of the insulators;The fiber rod uses the ECR high-temperature and acid-proof material; The end fitting connection adopts the zinc cover protection, supersonic monitor and coaxial constant compression controlled by computer, finished with good appearance and high quality.

Different metal end fitting show ,suspension insulator,long rod insulator,Polymer insulator,cap and pin insulator,Isolator Insulators.

Different color show ,insulator manufacturers,hollow insulators,power line insulators,power line insulator,polymer post and suspension insulator.

The Feature Of Our Compsoite Insulators

1) Silicon Rubber for sheds/ housing

2) Glass-fiber reinforced epoxy resin rod (ECR type) for core

3) Hop dip galvanized cast steel for metal fittings

4) Rated voltage:10KV~220KV

5) 5000hours aging test.

6) IEC Standard.

Fiberglass Rod Specificationthe Datasheet Of Composite Suspension Insulators

Insulator Mode	Rated Voltage (KV)	Rated mechanical tensile load (KN)	Connection structure mark	Structure Height mm	Minimum distance ArcL.	Minimum nominal Creepage distance mm	Full-wave Lightning Impulse withstand voltage (peak)	Min.wet withstand voltage per minute at power frequency
FXWB4-10/100	10	100	16	400±15	200	365	110	50
FXWB4-35/70	35	70	16	630±15	450	1015	230	95
FXWB4-35/100	35	100	16	650±15	450	1015	230	95
FXWB4-66/70	66	70	16	935±15	700	1900	410	185
FXWB4-66/100	66	100	16	935±15	700	1900	410	185
FXWB4-110/70	110	70	16	1240±15	1000	3150	550	230
FXWB4-110/100	110	100	16	1240±15	1000	3150	550	230
FXWB4-220/100	220	100	16	2150±15	1000	6300	1000	395

Product detail pictures:

Related Product Guide:

Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for New Arrival China Cross Arm Insulator - Composite Suspension Insulators – Fayun , The product will supply to all over the world, such as: Brazil, Tunisia, Saudi Arabia, If any item be of interest to you, please let us know. We will try our best to satisfy your requirements with high quality products, the best prices and prompt delivery. Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

Composite Insulator

Composite Pin Insulator

Cross Arm Insulator

Long Rod Composite Insulators

Pin Insulator

Polymer Suspension Insulator

Polymeric Insulator

Power Station Post Insulators

Rubber Insulator

Silicone Rubber Suspension Insulator

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.