Factory Supply Hdpe Pin Insulator - Composite Suspension Insulators – Fayun

Short Description:

Product Detail

Product Tags

Feedback (2)

Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Composite Insulator, Fiberglass Tube, Metal Oxide Varistor For 10kv Arrestor, We attend seriously to produce and behave with integrity, and by the favor of customers at home and abroad in the xxx industry.

Factory Supply Hdpe Pin Insulator - Composite Suspension Insulators – Fayun Detail:

Composite suspension insulators:the silicon rubber rain shed, designed according to the aerodynamics principle, use the whole-moulding method, to make sure the validity of total creepage distance under every climate and nasty conditions, as well as improved the pollution discharge of the insulators;The fiber rod uses the ECR high-temperature and acid-proof material; The end fitting connection adopts the zinc cover protection, supersonic monitor and coaxial constant compression controlled by computer, finished with good appearance and high quality.

Different metal end fitting show ,suspension insulator,long rod insulator,Polymer insulator,cap and pin insulator,Isolator Insulators.

Different color show ,insulator manufacturers,hollow insulators,power line insulators,power line insulator,polymer post and suspension insulator.

The Feature Of Our Compsoite Insulators

1) Silicon Rubber for sheds/ housing

2) Glass-fiber reinforced epoxy resin rod (ECR type) for core

3) Hop dip galvanized cast steel for metal fittings

4) Rated voltage:10KV~220KV

5) 5000hours aging test.

6) IEC Standard.

Fiberglass Rod Specificationthe Datasheet Of Composite Suspension Insulators

Insulator Mode	Rated Voltage (KV)	Rated mechanical tensile load (KN)	Connection structure mark	Structure Height mm	Minimum distance ArcL.	Minimum nominal Creepage distance mm	Full-wave Lightning Impulse withstand voltage (peak)	Min.wet withstand voltage per minute at power frequency
FXWB4-10/100	10	100	16	400±15	200	365	110	50
FXWB4-35/70	35	70	16	630±15	450	1015	230	95
FXWB4-35/100	35	100	16	650±15	450	1015	230	95
FXWB4-66/70	66	70	16	935±15	700	1900	410	185
FXWB4-66/100	66	100	16	935±15	700	1900	410	185
FXWB4-110/70	110	70	16	1240±15	1000	3150	550	230
FXWB4-110/100	110	100	16	1240±15	1000	3150	550	230
FXWB4-220/100	220	100	16	2150±15	1000	6300	1000	395

Product detail pictures:

Related Product Guide:

The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for Factory Supply Hdpe Pin Insulator - Composite Suspension Insulators – Fayun , The product will supply to all over the world, such as: Mauritania, Provence, Nepal, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

Composite Insulators

Composite Suspension Insulator

Composite Suspension Tension Insulator

Line Post Insulators

Polymer Suspension Insulator

Polymeric Suspension Insulator

Silicon Insulator

Silicon Rubber Insulator

Silicone Rubber Insulator

Transmission Insulator

We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!

By Mario from Montreal - 2018.09.12 17:18

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!

By Eleanore from Liberia - 2017.06.29 18:55

Write your message here and send it to us