Factory source Epoxy Round Rod - Epoxy fiberglass tube – Fayun

Short Description:

Product Detail

Product Tags

Feedback (2)

We insist about the theory of growth of 'High excellent, Performance, Sincerity and Down-to-earth working approach' to offer you with great company of processing for Mov Block, Composite Insulator, Power Station Post Insulators, We aim at Ongoing system innovation, management innovation, elite innovation and market innovation, give full play to the overall advantages, and constantly improve service quality.

Factory source Epoxy Round Rod - Epoxy fiberglass tube – Fayun Detail:

Epoxy fiberglass tube is made by good quality glass fiber steeped into epoxy resin of thermostability,which is high quality material as making high voltage electric devices,such as breakers,thimbles,mutual inductors,zinc oxide arresters,etc.

Inner diameter(mm):
Ø24 Ø30 Ø33 Ø36 Ø38 Ø42 Ø46 Ø48 Ø50 Ø52 Ø54 Ø55
Ø56 Ø58 Ø60 Ø63 Ø66 Ø74 Ø75 Ø76 Ø78 Ø Ø80 Ø82 Ø100 Ø105
Ø115 Ø130 Ø140 Ø144 Ø180 Ø1851 Ø94 Ø210 Ø240 Ø245 Ø250 Ø253

Other Inside diameter is available.

Outer diameter and length can be made by customers’ specific requirements.

Features

*Non-Corrosive

*Dimensionally Stable

*Lower Life Cycle Cost

*Flame Retardant

*Easy to Fabricate and Install

*Electrically Non-Conductive

*Lightweight/High Strength

*Resists Insect Damage

*High Impact Strength

*Low Water Absorption

*Greater Flexural Strength Than Timber

*Non-Leeching

Physical,mechanical and dielectric property should follow the table below:

Technical requirement
Normal Diameter	Thickness	Length	Tolerance Allowed
Normal Diameter	Thickness	Length	inside diameter	outside diameter	Length
30~70	3~20	500	±0.3	±0.3	±1
70~150	3~20	1000	±0.5	±0.5	±2
150~550	10~100	2800	±0.5	±0.2	±2
Physical and mechanical parameters			Physical and mechanical parameters
Index Name	Unit	Index	Index Name	Unit	Index
Density	g/cm3>	≥1.80	Density	g/cm3>	≥1.80
Water absorption	%	≤0.15	Water absorption	%	≤0.15
Intensity of curvature(circling direction)	Mpa	≥400	Intensity of curvature(circling direction)	Mpa	≥400
Intensity of compress	Mpa	≥98	Intensity of compress	Mpa	≥98
Voltage vitality on parallel layer at normal state for 5min	Kv	≥25	Voltage vitality on parallel layer at normal state for 5min	Kv	≥25
Voltage vitalityon vertical layer in the oil at 90°C for 5min	MV/m	≥12	Voltage vitalityon vertical layer in the oil at 90°Cfor 5min	MV/m	≥12

Product detail pictures:

Related Product Guide:

We thinks what clients think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater quality, lessen processing costs, price ranges are much more reasonable, won the new and outdated shoppers the support and affirmation for Factory source Epoxy Round Rod - Epoxy fiberglass tube – Fayun , The product will supply to all over the world, such as: Kyrgyzstan, Belgium, Tanzania, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we are going to continue with the most qualified and high quality service to offer the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!

Epoxy Solid Rod

Fiber Glass Bar

Fiberglass Tube

Frp Fiberglass Rods

Frp Plastic Rod

Frp Rods For Transformer

Lightning Rod

Mov Resistor

Surge Protector 3 Phase

Surge Protector Device

The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.